The Taurus TX22 represents one of the most popular rimfire pistols on the market—delivering 16- or 22-round capacity, optics-ready variants (TORO), threaded barrel options, and reliable function at an accessible price point.
Whether you're running the standard model, Competition variant, Compact configuration, or TORO optics-ready setup, the right accessories transform this .22 LR platform from capable plinker into a competition-ready or training-focused system.
This guide covers holsters, optic mounting, magazines, compensators, triggers, sights, and maintenance gear that maximize the Taurus TX22's potential across recreational shooting, NRL22 competition, and suppressed applications.
Holsters for Taurus TX22
Your TX22 holster selection demands attention to the full-size frame's 4.6" barrel, optics-ready slide configurations on TORO models, and whether you've added compensators or weapon lights. Quality holsters accommodate these features while providing secure retention through friction, adjustable tension, or active retention mechanisms.
IWB Holsters
Inside-the-waistband carry suits range trips or casual carry situations where some concealment matters, though the TX22's full-size dimensions make true concealed carry challenging compared to dedicated defensive pistols. Premium IWB holsters use reinforced mouths to prevent collapse during one-handed reholstering and adjustable cant angles to balance comfort against draw efficiency.
OWB Belt Holsters
Outside-the-waistband holsters work for range sessions, competition shooting, or outdoor applications where concealment isn't critical. OWB configurations distribute the TX22's loaded weight comfortably during extended wear and provide faster access through reduced draw length.
OWB Paddle Holsters
Paddle holsters eliminate belt threading via wide paddles that slide inside the waistband, making them practical for range trips or training where frequent holster removal occurs. The paddle distributes weight across a larger surface area than standard belt clips while maintaining adequate retention for most applications.
Drop Leg Holsters
Thigh-mounted drop-leg configurations position the TX22 lower on the body, clearing bulky gear while maintaining accessibility during outdoor or competitive applications. Adjustable leg straps distribute weight across the thigh to prevent holster migration during movement.
Optics and Red Dot Sights for Taurus TX22
TORO variants feature optics-ready slides using Shield RMSc footprints, accepting Holosun 507K, Shield RMSc, Swampfox Sentinel, and similar micro red dots directly without adapter plates.
Standard TX22 models require aftermarket optic plates or slide milling for red dot mounting. Micro red dots dramatically improve target acquisition speed and precision during rapid strings, particularly beneficial for Steel Challenge competition or precision rimfire training applications.
RMSc-Footprint Optic Compatibility
TORO models accept RMSc-footprint optics including Holosun 507K X2, Holosun 407K, Shield RMSc, and Swampfox Sentinel without modifications.
Standard models require adapter plates from manufacturers like Lakeline LLC or professional slide milling to accommodate micro dots. Verify optic compatibility before purchase to avoid mounting complications.
Popular Micro Dot Options
Holosun 507K X2 provides multiple reticle options and solar backup at mid-range pricing, Shield RMSc serves budget-conscious users seeking proven reliability, and Swampfox Sentinel delivers competitive features with warranty support.
Window size, battery life, reticle options, and brightness settings drive selection alongside mounting compatibility and budget considerations.
Adapter Plates and Mounting Solutions
Aftermarket adapter plates from Lakeline LLC, C&H Precision, and similar manufacturers enable optic mounting on standard TX22 models. These plates attach through existing sight dovetails or mounting holes, accepting various optic footprints.
Professional slide milling provides lower mounting heights and cleaner profiles compared to adapter plates.
Installation and Zero Procedures
Proper optic installation requires cleaning the mounting surface thoroughly, applying medium-strength thread-locker to mounting screws, and torquing to manufacturer specifications—typically 12–15 inch-pounds for micro dot mounting screws.
Zero with your preferred ammunition after initial installation and verify zero maintains through the first 100–200 rounds as screws settle.
Magazines and Capacity Options for Taurus TX22
The TX22 uses proprietary double-stack magazines available in 16- and 22-round capacities, with 10-round options for restricted states. Factory Taurus magazines represent the reliability baseline, while aftermarket options from ProMag provide cost-effective alternatives.
Competition shooters often run +5 magazine bumpers from TANDEMKROSS, extending capacity to 21 or 27 rounds while improving reload indexing through enlarged base pads.
Factory Taurus Magazines
Taurus factory magazines deliver proven reliability through robust polymer construction, quality followers, and properly-tensioned springs.
The 16-round standard magazine balances capacity against overall length, while 22-round extended mags provide maximum on-board ammunition for competition applications. Ten-round magazines comply with capacity restrictions in California, Colorado, and similar jurisdictions.
ProMag Aftermarket Magazines
ProMag manufactures 21-round TX22 magazines offering increased capacity at lower price points compared to factory units.
These aftermarket magazines fit most TX22 variants, though individual testing remains prudent before competition or serious training use. Build multiple-magazine inventories cost-effectively through ProMag options.
Magazine Bumpers and Extensions
TANDEMKROSS Wingman +5 magazine bumpers add five rounds to factory magazines while improving reload indexing through enlarged funnel profiles.
These aluminum bumpers attach via modified base pad screws and require compatible magazine springs to maintain reliable feeding. Competition shooters running 22-round mags with +5 bumpers achieve 27-round capacity.
Magazine Springs and Maintenance
Green magazine springs from TANDEMKROSS address feed reliability issues with worn magazines or tune magazine function for extended capacity configurations.
Quality followers reduce friction and improve feeding reliability compared to worn factory components. Replace magazine springs every 10,000–15,000 rounds or when feeding issues develop.
Compensators and Muzzle Devices for Taurus TX22
Threaded barrel variants accommodate compensators and suppressors via 1/2x28 TPI threading, with comps reducing muzzle flip and improving follow-up shot speed.
TANDEMKROSS Game Changer PRO, Steam Demon, and Lakeline LLC slide-profile compensators provide measurable recoil reduction for competition applications while maintaining reliability with standard-velocity .22 LR ammunition.
TANDEMKROSS Game Changer PRO
The Game Changer PRO delivers proven .22 LR-specific compensation through dual-port design, reducing muzzle rise 15–25% depending on ammunition and shooter technique.
The PRO2 variant accommodates suppressor mounting for users running suppressed TX22 configurations. Stainless steel construction provides durability through thousands of rounds.
TANDEMKROSS Steam Demon
Steam Demon compensators offer compact .22 LR compensation in shorter profiles than Game Changer models, adding minimal overall length while providing measurable recoil reduction.
Single-piece aluminum construction maintains light weight while delivering adequate compensation for recreational and competition shooting.
Lakeline LLC Slide-Profile Compensators
Lakeline manufactures two-piece slide-profile compensators that match TX22 slide dimensions, creating integrated appearances while reducing muzzle flip.
These compensators attach via barrel threading and require no permanent modifications. Black nitride finishes match factory slide coatings across TX22 variants.
Installation and Timing Considerations
Proper compensator installation requires checking thread engagement depth to prevent barrel shoulder damage, timing ports for vertical alignment through test fitting, and applying thread-locker after confirming proper timing.
Verify compensators don't interfere with suppressor-height sights or optic sight pictures before permanent installation.
Triggers and Internal Components for Taurus TX22
The TX22 ships with a decent striker-fired trigger delivering 5–6 pound pulls with moderate reset characteristics, adequate for plinking but open to refinement through aftermarket trigger components.
TANDEMKROSS Victory triggers, lightened trigger springs, and polished internal components improve pull weights and reset feel, enhancing performance for competition applications where rapid follow-up shots matter.
TANDEMKROSS Victory Trigger
Victory triggers from TANDEMKROSS reduce pull weights to 3.5–4.5 pounds while improving break characteristics and reset feel.
Aluminum construction lightens trigger weight while widened trigger faces distribute pressure across larger surface areas. These triggers suit competition applications but maintain adequate safety margins for recreational use.
Lightened Trigger Springs
TANDEMKROSS lightened trigger springs decrease trigger pull weights 0.5–1.5 pounds depending on spring selection and individual pistol characteristics.
Conservative spring selection maintains reliable ignition with standard-velocity .22 LR ammunition while providing measurable pull weight reductions. Test thoroughly with your preferred ammunition before competition use.
Eagle's Talon Extractor
TANDEMKROSS Eagle's Talon extractors replace factory extractors with enhanced designs featuring improved claw geometry and spring tension.
These upgraded extractors reduce extraction failures common with certain ammunition types, particularly beneficial for competition shooters running high volumes through TX22 pistols.
Installation and Function Testing
When installing trigger components, follow manufacturer instructions carefully regarding spring orientation and component alignment, function test with dummy rounds to verify reliable striker operation, and live fire test extensively before trusting modified triggers in competition.
Professional installation ensures safe function while maintaining factory safety standards.
Sights for Taurus TX22
Factory TX22 models ship with three-dot white sights adequate for basic use, while TORO variants include optics cuts but retain backup iron sights.
Aftermarket fiber-optic sights from TANDEMKROSS, Night Fision tritium night sights, and adjustable rear sights improve target acquisition speed and low-light visibility across varied shooting applications.
TANDEMKROSS Fiber-Optic Sights
TANDEMKROSS manufactures fiber-optic front sights and Eagle Eye rear peep sights that drastically improve sight picture clarity and acquisition speed.
Green and red fiber colors gather ambient light into brilliant aiming points, accelerating target transitions during Steel Challenge or recreational shooting. Rear peep sights provide precision aperture aiming for accuracy-focused applications.
Night Fision Tritium Night Sights
Night Fision produces tritium night sight sets with orange, yellow, or green front tritium inserts paired with square-channel tritium rear sights.
Self-luminous tritium provides aiming point visibility in complete darkness, though rimfire pistols rarely see serious defensive use. Tritium brightness fades over 10–12 years, requiring eventual replacement.
Adjustable Rear Sights
Adjustable rear sights from aftermarket manufacturers allow precise windage and elevation adjustments for load-specific zeroing or compensating for varying distances.
Fine-click adjustments accommodate different ammunition types or enable precise holds at extended ranges during precision rimfire applications.
Sight Installation Requirements
TX22 sight installation typically requires sight pusher tools or qualified gunsmith services to prevent slide damage during removal and installation.
Front sights often use dovetail retention requiring careful alignment and proper drive-in force. Rear sights slide into dovetail cuts with tight tolerances demanding proper tooling.
Charging Handles and Manipulation Enhancements for Taurus TX22
The TX22's enclosed slide design creates limited gripping surfaces for slide manipulation, particularly when wearing gloves or during rapid reloads in competition. TANDEMKROSS halo charging rings, Lakeline charging handles, and similar manipulation enhancements provide enlarged gripping surfaces that improve slide manipulation speed and reliability.
TANDEMKROSS halo Charging Ring
halo charging rings attach to TX22 slides via set screws, creating enlarged manipulation surfaces around slide perimeters. Anodized aluminum construction in various colors provides durable gripping surfaces while adding minimal weight.
These rings drastically improve slide manipulation with gloved hands or during speed reloads.
Lakeline Charging Handles
Lakeline LLC manufactures slide-mounted charging handles that attach via existing slide cuts, providing enlarged manipulation points without requiring permanent modifications. These handles suit users preferring traditional charging handle manipulation over ring-style enhancements.
Installation and Function Verification
When installing charging enhancements, verify set screws don't protrude into slide channel interfering with frame contact, confirm handles clear holsters if planning to carry, and function test extensively to ensure manipulation aids don't interfere with normal cycling or create snagging points.
Grips and Ergonomic Enhancements for Taurus TX22
Factory polymer texturing provides adequate purchase, but aftermarket grip enhancements address texture intensity and palm swell for improved control during extended shooting sessions.
Talon Grips offers granulate and rubberized textures specifically fitted to TX22 dimensions, increasing traction without permanent modification.
Talon Grips
Talon Grips manufactures granulate and rubberized textures pre-cut for TX22 frames, providing enhanced traction through adhesive-backed overlays.
Granulate textures deliver aggressive purchase similar to skateboard tape, while rubberized versions offer softer grip with moisture resistance. Installation requires cleaning the frame thoroughly and carefully positioning the pre-cut panels.
Grip Considerations
When selecting grips, aggressive textures improve control during rapid strings but may cause discomfort during extended range sessions without gloves, rubberized options provide adequate purchase with reduced abrasiveness, and grip thickness remains minimal with overlay-style enhancements maintaining factory circumference.
Barrels and Barrel Upgrades for Taurus TX22
Aftermarket barrels from Lakeline LLC provide threaded options for standard models, extended lengths for improved velocity and sight radius, or upgraded finishes in black nitride, gold, bronze, or prizm PVD.
Competition barrels prioritize accuracy through match-grade chambers and improved crown geometry, while threaded barrels enable compensator or suppressor mounting.
Lakeline LLC Target Barrels
Lakeline manufactures target barrels in various lengths and finishes, offering improved accuracy through match-grade chambers and precision crowning.
Threaded variants accept compensators or suppressors via 1/2x28 TPI threading. Black nitride, gold PVD, and bronze PVD finishes provide corrosion resistance with aesthetic customization.
Taurus Factory Barrels
Taurus produces replacement barrels in standard and competition configurations, with factory barrels maintaining OEM specifications and proven reliability. Competition barrels include lightening cuts and may feature upgraded finishes compared to standard offerings.
Barrel Installation
Proper barrel installation requires removing the slide assembly, driving out the barrel pin using appropriate punches, and verifying proper barrel/slide lockup after installation. Professional installation ensures correct timing and prevents damage to precision-machined components.
Magazine Releases and Reloading Enhancements for Taurus TX22
The TX22's ambidextrous magazine release works adequately, but TANDEMKROSS Titan extended magazine releases provide enlarged paddles that improve manipulation speed during competitions or high-volume training.
Oversized releases suit shooters with larger hands or those wearing gloves during outdoor shooting.
TANDEMKROSS Titan Magazine Release
Titan extended magazine releases from TANDEMKROSS increase paddle surface area by 50–75% compared to factory releases, enabling faster magazine drops during competition reloads.
Anodized aluminum construction in various colors provides durability while maintaining light weight. Ambidextrous design suits both right- and left-handed shooters.
Installation and Adjustment
Installing extended magazine releases requires verifying proper spring tension to prevent unintentional magazine drops, confirming holster compatibility if carrying, and testing with fully-loaded magazines to ensure reliable function under actual operating conditions.
Recoil Systems and Guide Rods for Taurus TX22
Aftermarket recoil systems from TANDEMKROSS and similar manufacturers replace factory recoil assemblies with upgraded guide rods featuring improved materials or captive spring designs.
Sentinel guide rods reduce recoil system vibration while maintaining reliable cycling with standard-velocity .22 LR ammunition.
TANDEMKROSS Sentinel Guide Rod
Sentinel guide rods feature stainless steel construction with captive spring designs that prevent spring binding during cycling.
These upgraded guide rods provide smoother recoil impulse and reduced muzzle flip compared to factory assemblies, beneficial for competition applications prioritizing rapid follow-up shots.
Installation Considerations
When installing upgraded recoil systems, verify spring rates maintain reliable cycling with your preferred ammunition, confirm guide rod length matches slide specifications, and function test extensively before competition use to ensure reliable operation across varied conditions.
Maintenance Tools and Cleaning Supplies for Taurus TX22
Rimfire ammunition generates significant fouling through unburned powder residue, lead deposits, and waxy lubricants coating bullets. Regular cleaning maintains TX22 reliability, with particular attention to chamber, feed ramp, extractor, and firing pin channel where fouling accumulates rapidly.
Essential Cleaning Kits
Quality cleaning kits include bronze or nylon bore brushes sized for .22 caliber, chamber brushes that reach fully into chambers removing lead and carbon rings, proper-length cleaning rods that won't damage barrel crowns, and nylon detailing brushes for frame rails and slide serrations.
TANDEMKROSS Essential Maintenance Kit
TANDEMKROSS produces TX22-specific maintenance kits including specialized tools for disassembly, cleaning brushes sized for critical areas, and replacement pins or springs for common wear items. These comprehensive kits provide everything needed for thorough TX22 maintenance in single packages.
Lubrication and Function
The TX22 requires light lubrication at slide rails, barrel lugs, disconnector interfaces, and striker channel. Quality gun oils from Slip 2000, Break-Free CLP, or Hoppe's No. 9 provide adequate lubrication for rimfire applications.
Apply thin oil films rather than excessive amounts to prevent fouling accumulation.
Maintenance Schedule
Rimfire pistols demand cleaning every 300–500 rounds to maintain reliable function, extractor cleaning every range session to prevent extraction failures, and chamber scrubbing with chamber brushes to remove lead deposits that cause feeding issues. Magazine springs require replacement every 15,000–20,000 rounds.
Storage and Transport for Taurus TX22
Proper storage protects the TX22 during transport and maintains function through periods of non-use.
Hard cases with foam cutouts secure the pistol during transport, preventing impact damage and providing lockable storage. Range bags accommodate TX22 pistols plus magazines, ammunition, and accessories in organized configurations.
Hard Cases
Pistol cases from Pelican, Apache, or similar manufacturers provide impact-resistant protection with customizable foam interiors. Cases should accommodate optic-equipped configurations if running TORO models with mounted dots. Lockable latches meet transportation requirements.
Range Bags
Dedicated range bags include magazine pouches, ammunition storage, and accessory compartments that organize TX22 gear efficiently. Padded interiors protect finishes while maintaining quick accessibility. Quality bags feature reinforced construction surviving repeated transport cycles.
Long-Term Storage
For long-term storage, climate-controlled safes prevent humidity damage to both pistol and ammunition. Quick-access safes maintain ready accessibility while securing the TX22 from unauthorized access, though rimfire pistols rarely serve primary defensive roles.
Conclusion: Best Accessories for the Taurus TX22
Outfitting your Taurus TX22 with appropriate accessories maximizes its potential across competition, training, and recreational shooting disciplines.
Quality holsters from Alien Gear Holsters tailored to your application ensure secure retention and accessibility across range, competition, and outdoor positions. RMSc-footprint micro red dots on TORO models bring precision aiming capability, while adapter plates enable optic mounting on standard variants.
TANDEMKROSS performance upgrades including Victory triggers, halo charging rings, Titan magazine releases, and Wingman magazine bumpers transform the TX22 from capable factory pistol into competition-ready system.
Lakeline LLC barrels and compensators add accuracy and recoil reduction for serious competition applications. ProMag magazines and factory 22-round extensions address capacity requirements.
Whether you're running a standard TX22 for plinking, Competition model for Steel Challenge, Compact for outdoor carry, or TORO for precision training, these accessories transform Taurus' rimfire platform into a fully optimized system matched to your specific requirements.